Cavity Wall Insulation

Accredited and approved
CWI

What Is Cavity Wall Insulation?

Cavity Wall Insulation (CWI) is the process of filling the gap between the inner and outer layers of external walls (the cavity) with insulating material. Most UK homes built after the 1920s have cavity walls, and filling this space can dramatically reduce heat loss.

CWI is one of the most cost-effective energy efficiency measures. Under PAS 2035:2023, CWI must be installed by certified professionals, with a full risk assessment as part of the PAS 2035 whole-house retrofit process.

INSTALL

What’s Involved in Cavity Wall Insulation?

The process includes:

  • Drilling small holes (typically 22mm in diameter) into the mortar joints of external walls.
  • Blowing insulating material (e.g. bonded polystyrene beads or mineral wool) into the cavity using specialist equipment.
  • Filling and making good the drill holes with colour-matched mortar.
  • Ensuring insulation is evenly distributed throughout the wall cavity.
  • Checking ventilation and airbricks remain clear.

The insulation must achieve a U-value of 0.55 W/m²K or better to meet PAS 2035 and Building Regulation standards.

COMPLIANCE

PAS 2035 Compliance

Under PAS 2035, Cavity Wall Insulation must:

  • Be installed by PAS 2035 certified and TrustMark registered installers.
  • Be specified through a PAS 2035 whole-house assessment, overseen by a qualified Retrofit Coordinator.
  • Use approved insulation systems with full third-party certification (e.g. BBA).
  • Include moisture and ventilation risk assessments, especially in exposed or flood-risk areas.
  • Be suitable for the wall construction type, exposure zone, and condition of the property.

A borescope survey and wall tie inspection are often part of the pre-installation process.

PROS

Benefits of Cavity Wall Insulation

Affordable and Quick to Install

Typically completed in less than a day with minimal disruption.

Effective Thermal Barrier

Can reduce heat loss by up to 35% in uninsulated cavity wall homes.

Reduced Energy Bills

Leads to lower heating demand and significant long-term savings.

Minimal Interior Impact

Installed entirely from the outside— no changes needed to the inside of the home.

Long-Lasting

Modern CWI systems are designed to last the lifetime of the building with no maintenance.

CONS

Considerations & Potential Drawbacks

Not Suitable for All Homes

Properties with narrow cavities, timber-framed walls, or structural issues may not qualify.

Moisture Risk in Certain Areas

Homes in exposure zones 4 or 5 (high wind-driven rain) may require additional checks or be deemed unsuitable unless protected by render or cladding.

Requires Pre-Install Survey

A full assessment of wall condition, damp, and ventilation is essential to avoid future problems.

Can’t Be Installed in Flood-Risk Zones Without Mitigation

Properties in high flood-risk areas need additional moisture management.

Older Insulation May Need Remediation

If CWI was installed in the past and failed (e.g. older foam systems), it may need to be extracted and reinstalled to current standards.

ALIGN

Is Your Home Suitable?

Cavity Wall Insulation is ideal if:

SUMMARY

Conclusion

Cavity Wall Insulation remains one of the most impactful and affordable home energy upgrades available. When installed to PAS 2035 standards and supported by a PAS 2035 risk-managed approach, it provides immediate and long-lasting benefits— cutting energy bills, reducing carbon emissions, and improving year-round comfort.

With little disruption to install, CWI is a good first step towards a warmer, more efficient home.

Ready to cut your energy bills?

Send us your address and we will do the rest.